Jorefco takes pride in its expertise in building mobile office and OB (Outside Broadcast) trucks, offering innovative solutions for businesses and media organizations. Our mobile office and OB trucks are designed to provide a convenient and fully equipped workspace on the go, allowing you to carry out your operations efficiently and effectively, no matter where you are.

Mobile Office Trucks: Our mobile office trucks are custom-built to meet the specific requirements of businesses that require a flexible workspace in various locations. These trucks are equipped with all the essential amenities and features of a traditional office, including comfortable seating, desks, storage cabinets, power outlets, climate control, and communication systems.

OB (Outside Broadcast) Trucks: Jorefco specializes in constructing OB trucks that cater to the demanding needs of the broadcasting and media industry. These trucks are designed to facilitate on-location broadcasts, live events coverage, and mobile production studios. Our OB trucks are equipped with advanced audio and video equipment, control rooms, editing facilities, communication systems, and satellite transmission capabilities.

Mobile Office Features

Our Vehicles are equipped:


Mobile Office Truck

Mobile Office VAN

OB Truck

Mobile Office Specification

Body Dimension: (EXTERNAL)
Height fr. floor2,500mm
Frame ConstructionAll welded steel construction to specification ST 37-2 or equivalent
Chassis Extension1100mm length extension to be connected with complete bolt and nuts to the original chassis.
External CladdingMade of 3mm GRP sheet in white finish coated
Internal Cladding/InsulationLeft and right side wall of the body is insulated with 50mm /PU foam + 12mm plywood, 6mm MDF plywood and covered with 0.5mm and A-210 PORTLAND fabric.
Ceiling150mm draft ceiling is insulated with 50mm/PU foam and covered with decorated wood.
FlooringFloor is made up of 100mm panel and to be covered by washable vinyl flooring. (W500 x H80mm will be cut for the cable access.)
Side CladdingThe external cladding is made 3mm aluminum plain sheet. This is divided as a side board for storage purposes. Locks, hinges, holder and other accessories of the door will be provided.
Side Door(s)One (1) standard door will be provided. A main entrance/exit with sliding manual stairs will be provided. Locks, hinges, holder and other accessories of the door will be provided.
Door extensionOne (1) door access at extension room with manual sliding stairs.
Rear DoorOne (1) rear double leaf door that made of MS tube and plate. Locks, hinges, holder and other accessories of the door will be provided. Sliding stair will be provided.
Access Door/windowsDoors are provided with complete locks, hinges and to be driven by the gas spring. (see attached drawing)
Roof ReinforcementRe-enforcement will be made as per the part which in need to fix.
Body EdgesIt will be covered with aluminum angles and trim.
Ladder & RailsMade up of stainless steel pipe and it is fixed on rear side. Rails will be fixed on the top.
Hydraulic JackFour (4) pcs hydraulic jack with the complete accessories will be fixed on under the body. Two (2) jacks on the front and two (2) jacks on the rear side.
PTO & PUMP60-80cc capacity, maximum pressure of 280 bars and continues pressure is 190 bars will be provided.
Control LeverFour levers will be provided. One for front jack, one for rear jack, one for sliding platform jack. (Note: Remote control will be installed as per customer request.)
Hydraulic HoseAll hoses will be mounted under chassis and made of rubber.
Other AccessoriesFour (4) 2kg fire extinguisher
Air deflector (Note: To be re-confirmed by the client.)
Racks (Note: Dimension and design must be decided by the client.)
Tables (Note: Dimension and design must be decided by the client.)
LightsOriginal Rear lights, backing lights, and rear signal lights will be utilized.
Four (4) 220V tube lights and twelve (12) 220V dimmable ceiling lights with will be provided.
Six (6) spot lights will be provided. Two (2) on the rear, left and right side.
WiringSupply wiring will be added for the mechanical and electrical accessories.
Supplyo   Supply from Shoreline (external source) through 3-pole CEE-plug
o   Original battery will be utilized.
Safetyo   One (1) distribution box with all the breakers on one of the right hand side cabin inside the working area will be provided
o   One (1) master power switch will be provided (Generator, Shoreline, & Off)
o   One (1) Earth grounding block will be provided to connect to the chassis/ground
ShorelineOne connector will be provided for external source
PaintingOne (1) coat of epoxy primer and Two (2) coats of finish paint for the body. One (1) coat/s of Finish paint ( color must be decided by client)

Mobile Office Drawings

Previous slide
Next slide

Brands We’re Proud to Call Customers

Request A Call

Fill this form to Request Call back from our Representative
Click Here

Download Brochure

Download Our Brochure
Click Here

About Company

JOREFCO is short form of Jordan Ref. Co. LLC. Jorefco Group is one of the main commercial vehicle bodybuilders and fabricators in U.A.E. with more than 40 Years of professional experience & doing business since year 1978 with head office based in Sharjah.

Contact US


Head Office: Jordan Refrigeration Co. LLC, P.O. Box 4623/ 4356, 22nd Street, Old BMW Road, Industrial Area 2, Sharjah, U.A.E.


+971-6-5330815/ +971-6-5333963


Copyright © 2023 JOREFCO. All Rights Reserved

We’re Always Here for You

Quotes are handled by one of our experts. We will reach you out in 3 to 4 Working Days