dhollandia Tail Lift

Jorefco specializes in the installation of various types of tail lifts on different vehicles, catering to the needs of passengers and cargo transport. Our range of tail lifts includes passenger tail lifts, van tail lifts, standard cantilever tail lifts, and slider tail lifts, providing versatile solutions for different applications.

At Jorefco, we prioritize safety, functionality, and durability in tail lift installations. With our tail lifts, customers can benefit from enhanced efficiency, improved accessibility, and seamless operations in their transportation and logistics activities.

Tail Lift Features

Our Tail Lifts are:

Models

STANDARD LIFTS

PASSENGER LIFTS

VAN LIFTS

COLUMN LIFTS

SLIDER LIFTS

Tail Lift Specification

Edit Content

DH-LM.10: superior stability and performance

The 4-cylinder DH-LM.10 has been DHOLLANDIA’s best seller in the light-duty truck range for many years, thanks to its superior stability and performance in comparison to competing 2-cylinder and 3-cylinder lifts, and its excellent price-quality ratio.

This lift is now partially superseded by the DH-LMA.08. But it continues to play an important role: for 1000 kg lift capacity; for platforms above 1800 mm; for vehicles up to 7.5T GVW with a floor height above 1050 mm, and for a number of special executions, such as the half-width lift DH-LMZ.10.

The DH-LM.10 is available with standard bolt-on mounting plates, and quick-fit mounting plates adapted to all popular brands and types of van chassis.

PLATFORMLight-weight aluminium platform, or heavy-duty steel platform
Aluminium platform with profiles oriented in longitudinal direction [type V...], and a cross milled anti-slip protection pattern
Synthetic rollers for the contact between the platform and the ground
FUNCTIONAL & MECHANICAL CHARACTERISTICSConical / wedge platform. Level ride with automatic tilt at ground level
Platform tilt adjustable at any position from the exterior controls
HYDRAULICAL CHARACTERISTICS2 lift cylinders for maximum platform stability
2 tilt cylinders with spring assisted platform opening
Electrical safety valves on all cylinders
Manual emergency operation on all electro valves
Cylinder piston rods in hard-chromed stainless steel
Cylinders equipped with rubber gaitors and lubrication.
Pump unit 12V or 24V DC, accessible on 5 sides for easy maintenance
ELECTRICAL CHARACTERISTICSControl box with battery disconnect switch, joystick control and change-over switch integrated in the cover of the pump unit 
Without battery disconnect switch: dual toggle-switch control box supplied loose 
Electrical controls without sensitive electronic components in basic configuration
Safe exterior controls with compulsory 2-hand operation
Electric motor with thermal cut-out fuse
FITTINGBolt-on mounting plates for quick and easy fitting
Also available with quick-fit mounting plates adapted to the vehicle brand, the wheelbase and overhang
Fixed 3-piece bumper bar available as option
FINISH & MAINTENANCELow-maintenance bearings in all articulation points, plus grease nipples
Lift frame in hot-dip zinc plated or "galvanised" finish. Best possible protection against corrosion .
Alu platform or platform sections in natural finish
Steel platforms to 2000 mm shotblasted and KTL epoxy primed, or in zinc primer at the discretion of DHOLLANDIA. Steel platforms > 2000 mm in zinc primer.
Edit Content

DH-LM.20: Top seller in the medium capacity range

The DH-LM.20 is an extremely versatile medium capacity lift, suitable for commercial trucks above 7.5T GVW, trailers and semi-trailers.

This powerful 4-cylinder lift is available with reinforced steel platforms or light-weight aluminium platforms up to 2250 mm. Longer platforms are available in combination with lift type DH-LM.30.

Special applications are available: lifts for truck-trailer combinations with draw-bar (DH-LV), adaptations for trailer-coupling mounted between the chassis beams (arm LMK), for very short overhang (DH-LMP), and for tipper vehicles (DH-KA).

PLATFORM• Light-weight aluminum platform, or heavy-duty steel platform
• Aluminum platform with profiles oriented in longitudinal direction [type V…], and a cross milled
Anti-Slip Protection pattern
• Synthetic rollers for the contact between the platform and the ground
• Maximum platform depth: 2450 mm
FUNCTIONAL & MECHANICAL CHARACTERISTICS• Conical / wedge platform. Level ride with automatic tilt at ground level
• Platform tilt adjustable at any position from the exterior controls
HYDRAULICAL CHARACTERISTICS• 2 lift cylinders for maximum platform stability
• 2 tilt cylinders with spring assisted platform opening
• Electrical safety valves on all cylinders
• Manual emergency operation on all electrovalves
• Cylinder piston rods in hard-chromed stainless steel
• Cylinders equipped with rubber gaitors and lubrication
• Pump unit 12V or 24V DC, accessible on 5 sides for easy maintenance
ELECTRICAL CHARACTERISTICS• Control box with battery disconnect switch, joystick control and change-over switch
• Without battery disconnect switch: dual toggle-switch control box supplied loose
• Electrical controls without sensitive electronic components in basic configuration
• Safe exterior controls with compulsory 2-hand operation
• Electric motor with thermal cut-out fuse
FITTING• Bolt-on mounting plates for quick and easy fitting
• Fixed 3-piece bumper bar available as option
FINISH & MAINTENANCE• Low-maintenance bearings in all articulation points, plus grease nipples
• Lift frame in hot-dip zinc plated or “galvanised” finish. Best possible protection against corrosion
Edit Content

DH-SO7.20: Double folded platform for vehicles with very short overhang

The slider lifts DH-SO… are equipped with a double folded platform, that rests on top of the lift arms when the lift is stowed away in its travel position. This compact construction is perfectly fit for installation on vehicles with very short overhang (e.g. semi-trailers with rear steering axle). Its platform is made of 2 light-weight aluminium sections, to maximize the pay-load of the vehicle and make the manual folding and unfolding of the platform as easy as possible for the operator.  

The DH-SO7 is lighter than the DH-SO6 and offers more ground clearance, but requires 50 mm more overhang for an equivalent platform depth. It is designed for general purpose distribution and parcel delivery.  

PLATFORMWeight-saving full aluminium platform (base section + foldable point)
Synthetic rollers for the contact between the platform and the ground
The folding and unfolding of the platform are assisted by powerful torsion springs
FUNCTIONAL & MECHANICAL CHARACTERISTICSConical / wedge platform. Level ride with automatic tilt at ground level
Platform tilt adjustable at any position from the exterior controls
Standard frame with pump unit on side; or special frame for even shorter mounting space with pump unit in mid position
HYDRAULICAL CHARACTERISTICS2 lift and 2 tilt cylinders for maximum platform stability
Electrical safety valves on all cylinders
Manual emergency operation on all electrovalves
Cylinder piston rods in hard-chromed stainless steel
Pump unit 12V or 24V DC, accessible on 5 sides for easy maintenance
Hydraulic retraction by means of a hydromotor + gearwheel system
ELECTRICAL CHARACTERISTICSControl box with battery disconnect switch, joystick control and change-over switch
Electrical controls without sensitive electronic components in basic configuration
Safe exterior controls with compulsory 2-hand operation
Electric motor with thermal cut-out fuse
FITTINGTruck: aluminium sliding tubes with bolt-on mounting brackets for quick fitting to truck chassis
(Semi) Trailer: aluminium sliding tubes with adjustable mounting clamps for quick fitting on (semi-) trailer chassis
Compact lift frame and a double-folded platform for mounting in a very short mounting space
FINISH & MAINTENANCELow-maintenance bearings in all articulation points, plus grease nipples
Lift frame in hot-dip zinc plated or “galvanised” finish. Best possible protection against corrosion.
Alu platform or platform sections in natural finish
FINISH & MAINTENANCE• Low-maintenance bearings in all articulation points, plus grease nipples
• Lift frame in hot-dip zinc plated or “galvanised” finish. Best possible protection against corrosion
Edit Content

DH-LM.15: Light-weight transition model

The DH-LM.15 was launched in 2012 as missing link between the 1000 and 2000 kg capacity lifts. Since then, it has become extremely popular as ideal weight saving lift for medium capacity trucks of 7,5T to 12T GVW.

It is considerably lighter and requires less overhang than the DH-LM.20; yet it is stronger and more robust than the DH-LM.10. It is recommended to use the DH-LM.15 instead of DH-LM.10 / LMQ.10 with 850 mm long lift arms and for 1000 kg lifts with platform depth above 1600 mm.

The mounting plates are bolt-on and fully adjustable in width.

PLATFORMLight-weight aluminum platform, or heavy-duty steel platform
Aluminum platform with profiles oriented in longitudinal direction, and a cross milled anti-slip protection pattern
Synthetic rollers for the contact between the platform and the ground
FUNCTIONAL & MECHANICAL CHARACTERISTICSIntelligent design offering maximum weight saving
Conical / wedge platform. Level ride with automatic tilt at ground level
Platform tilt adjustable at any position from the exterior controls
HYDRAULICAL CHARACTERISTICS2 lift cylinders for maximum platform stability
2 tilt cylinders with spring assisted platform opening
Electrical safety valves on all cylinders
Manual emergency operation on all electro valves
Cylinder piston rods in hard-chromed stainless steel
Cylinders equipped with rubber gaitors and lubrication
Pump unit 12V or 24V DC, accessible on 5 sides for easy maintenance
ELECTRICAL CHARACTERISTICSControl box with battery disconnect switch, joystick control and change-over switch
Electrical controls without sensitive electronic components in basic configuration
Safe exterior controls with compulsory 2-hand operation
Electric motor with thermal cut-out fuse
FITTINGBolt-on mounting plates for quick and easy fitting
Fixed 3-piece bumper bar available as option
FINISH & MAINTENANCELow-maintenance bearings in all articulation points, plus grease nipples
Lift frame in hot-dip zinc plated or “galvanised” finish. Best possible protection against corrosion.
Alu platform or platform sections in natural finish
Steel platforms to 2000 mm shotblasted and KTL epoxy primed, or in zinc primer at the discretion of DHOLLANDIA. Steel platforms > 2000 mm in zinc primer
Edit Content

H-SO.10: Lightest slider lift with double folded platform

The slider lifts DH-SO… are equipped with a double folded platform, that rests on top of the lift arms when the lift is stowed away in its travel position. This compact construction is perfectly fit for installation on vehicles with very short overhang
Safely stowed under the vehicle chassis, it offers free access to the cargo space at all times, and is well suited for the light-duty urban distribution. The 2 platform parts are made of light-weight aluminium to maximize the pay-load of the vehicle. 

The DH-SO.10 offers 750-1000 kg lift capacity, and is suitable for light-duty trucks from 3.5 – 12T GVW, light trailers and semi-trailers. Special mounting kits are available for installation on van chassis. There are 2 executions: the DH-SO.10 with fixed stabilizers, and the DH-SOC.10 with tilt cylinders and adjustable platform orientation

PLATFORMWeight-saving full aluminium platform (base section + foldable point)
Synthetic rollers for the contact between the platform and the ground
The folding and unfolding of the platform are assisted by powerful torsion springs
FUNCTIONAL & MECHANICAL CHARACTERISTICSIntelligent design offering maximum weight saving
Conical / wedge platform. Level ride with automatic tilt at ground level
Fixed stabiliser rods, no adjustable platform orientation
HYDRAULICAL CHARACTERISTICS2 lift cylinders for maximum platform stability
Electrical safety valves on all cylinders
Manual emergency operation on all electrovalves
Cylinder piston rods in hard-chromed stainless steel
Pump unit 12V or 24V DC, mounted in the middle between the lift arms
Hydraulic retraction by means of a hydromotor + gearwheel system
ELECTRICAL CHARACTERISTICSControl box with battery disconnect switch, joystick control and change-over switch
Electrical controls without sensitive electronic components in basic configuration
Safe exterior controls with compulsory 2-hand operation
Electric motor with thermal cut-out fuse
FITTINGTruck: aluminium sliding tubes with bolt-on mounting brackets for quick fitting to truck chassis
Compact lift frame and a double-folded platform for mounting in a very short mounting space
FINISH & MAINTENANCELow-maintenance bearings in all articulation points, plus grease nipples
Lift frame in Protection PLUS finish (zinc phosphate + KTL epoxy primer + polyester powder top coat)
Edit Content

DH-LSP.07: Largest possible platform surface on factory built panel vans

The DH-LSP.07 types 02 and 03 are derived from the basic model DH-LSP.07. Types 02 and 03 solve a number of mounting issues for well-defined types of vans, that couldn’t be solved elegantly with the standard model. 

The innovating shape of the lift arms is specially designed for vans where the vertical distance between the loading floor of the vehicle and the under side of the doors is significantly above average, and eliminates the necessity to cut in the steel construction of the body.  

Please contact JOREFCO to verify compatibility between the various types of vans and tail lift models

PLATFORMAvailable as full-width platform, as half-width platform, as foldable platform, and as replacement of the vehicle rear doors
Aluminum platform with profiles oriented in longitudinal direction, and a cross milled anti-slip protection pattern
Light-weight aluminum platform with anti-slip surface
FUNCTIONAL & MECHANICAL CHARACTERISTICSPlatform tilt adjustable at any position from the exterior controls
Conical / wedge platform. Level ride with automatic tilt at ground level
HYDRAULICAL CHARACTERISTICSCompact pump unit 12V or 24V DC, mostly premounted on the lift frame
Cylinder piston rods in hard-chromed stainless steel
Manual emergency operation on all electro valves
Electrical safety valves on all cylinders
2 lift cylinders for maximum platform stability
ELECTRICAL CHARACTERISTICSElectric motor with thermal cut-out fuse
Safe exterior controls with compulsory 2-hand operation
Electrical controls without sensitive electronic components in basic configuration
3+1 button control box, to be integrated in the side body panel
FITTINGBridge plate needed between the platform and vehicle floor, except in case of installation without rear doors
End stops for the lift arms premounted on the lift frame
Lift arms with unique shape that follows the contours of the vehicle’s impact guard, that avoids cut-outs in the body, and maximizes the ground clearance
Bolt-on quick-fit mounting plates, adapted to vehicle brand, wheelbase and overhang
FINISH & MAINTENANCEAlu platform or platform sections in natural finish
Lift frame in Protection PLUS finish (zinc phosphate + KTL epoxy primer + polyester powder top coat)
Low-maintenance bearings in all articulation points, plus grease nipples
Edit Content

DH-PH2.04: Safe and reliable interior passenger lift with 2 lift arms

The DH-PH2 is a twin-arms lift, suitable for mounting inside the rear doors of a wide range of Multi Passenger Vehicles, minibuses, and ambulance vehicles. In comparison to the single arm model, the reinforced construction with 2 arms provides excellent platform stability. It increases the safety and the sense of safety of the platform occupant.
In standard execution, the DH-PH2 is equipped with a closed platform surface in mesh steel.The horizontally folding platform offers improved rearward vision to the driver. Thanks to its reduced height, it is perfectly suited to vehicles with reduced roof level.

The vertical split platform  offers a much improved rearward vision to the driver, a fast escape route in case of emergency and an easy access to the vehicle interior (e.g. to load and unload luggage).

PLATFORMFlat platform in meshed steel. Hence rain, snow, mud,… are evacuated very quickly through the platform
Automatic roll-stop at the outboard platform edge
Automatic bridge plate + toe-guard + load restraint at the inboard platform edge
Mechanical platform lock, holding the platform in its travel position in case of accidental pressure loss
Raised side profiles as roll-off protection on the L+R sides of the platform
FUNCTIONAL & MECHANICAL CHARACTERISTICS2 reinforced lift arms for maximum platform stability
Flat platform, level ride
2 guard rails at the left and right side of the platform, which unfold or fold automatically when the platform is opened or closed
HYDRAULICAL CHARACTERISTICS2 lift cylinders for maximum platform stability
12V or 24V DC pump unit premounted at the side of the lift frame
Emergency hand-pump and emergency exit function
ELECTRICAL CHARACTERISTICS3-button wander lead with spiral cable
Main battery isolator switch remounted on the pump unit
FINISH & MAINTENANCELow-maintenance bearings in all articulation points
Intensive dampening of mechanical driving noises
Lift frame in Protection PLUS finish (zinc phosphate + KTL epoxy primer + polyester powder top coat)

Brands We’re Proud to Call Customers

Request A Call

Fill this form to Request Call back from our Representative
Click Here

Download Brochure

Download Our Brochure
Click Here

About Company

JOREFCO is short form of Jordan Ref. Co. LLC. Jorefco Group is one of the main commercial vehicle bodybuilders and fabricators in U.A.E. with more than 40 Years of professional experience & doing business since year 1978 with head office based in Sharjah.

Contact US

Address:

Head Office: Jordan Refrigeration Co. LLC, P.O. Box 4623/ 4356, 22nd Street, Old BMW Road, Industrial Area 2, Sharjah, U.A.E.

Phone:

+971-6-5330815/ +971-6-5333963

Email:

info@jorefco.com

Copyright © 2023 JOREFCO. All Rights Reserved

We’re Always Here for You

Quotes are handled by one of our experts. We will reach you out in 3 to 4 Working Days